英国欧盟标准

BS EN 166:1996 个人眼睛保护 ─ 规格

BS EN 169:1992 焊接及类似工作中采用的个人护眼装备的滤光用具

BS EN 171:1992 个人护眼装备上所使用之红外线滤光用具

BS EN 175:1997 个人保护 ─ 在焊接及相关工序中采用的护眼及护面装备

BS EN 207:1994 用以防止雷射光伤及个人眼睛之滤光用具及装备

BS EN 208:1994 使用于调校雷射光及雷射光系统之个人护眼用具

BS EN 379:1994 可转变透光度之焊接滤光用具及双段式透光度之焊接滤光用具

英国标准规格

BS 2092 一般用途的工业护眼用具

BS 1542 焊接及类似工作中防辐射的护眼及护颈用具

BS 679 焊接及类似工作中采用的滤光用具

BS 1729 钢铁工程中采用的绿色保护性眼镜及屏障

澳洲标准规格

AS 1337 工业护眼用具

AS 1338 焊接及有关工作中防辐射伤及眼睛的滤光用具

美国国家标准

ANSI Z87.1-1989 在职业及教育上对保护眼及面所采用的守则

ANSI Z136.1-1993 雷射光的安全使用规定

澳洲 / 新西兰标准

AS/NZS 1337:1992 工业上应用的护眼用具

AS/NZS 1338.1:1992 护眼用具中的滤光用具 ─ 防止焊接及相关工作中产生的辐射的滤光用具

AS/NZS 1338.3:1992 护眼用具中的滤光用具 ─ 防止红外线的滤光用具

欧盟标准

EN 166:1995 个人眼睛保护 ─ 规格

EN 169:1992 个人眼睛保护 ─ 焊接及相关技术上所采用的滤光用具 ─ 透光度要求及建议使用方法

EN 171:1992 个人眼睛保护 ─ 红外线滤光用具 ─ 透光度要求及建议使用方法

EN 175:1997 个人保护 ─ 在焊接及相关工序中采用的护眼及护面装备

EN 207:1998 个人眼睛保护 ─ 防止雷射光辐射之滤光用具及护眼用具

EN 208:1998 个人眼睛保护 ─ 使用于调校雷射光及雷射光系统之护眼用具（用于调校雷射光之护眼用具

EN 379:1994 可转变透光度之焊接滤光用具及双段式透光度之焊接滤光用具

日本工业标准

JIS T 8141:1980 防辐射的护眼用具

JIS T 8147:1994 护眼用具

注意: 根據《工廠及工業經營（保護眼睛）規例》，進行指明工序或使其眼睛有合理預見的受傷害危險的工序的僱員須使用由其僱主提供的護眼用具，而該等用具須符合勞工處處長認可的規格。

http://www.labour.gov.hk/chs/faq/eye.html

中国标准

GB 7584 Acoustics Hearing Protectors

美国标准

ANSI S12.6 American National Standard Methods for Measuring the Real-Ear Attenuation of Hearing Protectors

澳洲 / 新西兰标准

AS/NZS 1270 Acoustics - Hearing Protectors

欧洲标准：

EN 352-1 Hearing protectors. Safety requirements and testing. Ear-muffs

EN 352-2 Hearing protectors. Safety requirements and testing. Ear-plugs

EN 352-3 Hearing protectors. Safety requirements and testing. Ear-muffs attached to an industrial safety helmet

EN 352-4 Hearing protectors. Safety requirements and testing. Level-dependent ear-muffs

EN352-5 Hearing protectors. Safety requirements and testing. Active noise reduction ear-muffs

EN 352-6 Hearing protectors. Safety requirements and testing. Ear-muffs with electrical audio input

EN352-7 Hearing protectors. Safety requirements and testing. Level-dependent ear-plugs

日本标准

JIS T8161防音保护具

加拿大标准

CSA Z94.2 Hearing Protectors

国际标准

ISO 4869 Acoustics Hearing Protectors

注意: 根據《工廠及工業經營（石棉）規例》及《工廠及工業經營（密閉空間）規例》，有關僱員須使用由其僱主提供的呼吸器具，而該等用具須為勞工處處長認可的型號。有關已被認可的型號，請查閱以下清單。

http://www.labour.gov.hk/faq/oshq9_4a.htm

http://www.labour.gov.hk/faq/oshq9_4b.htm

http://www.labour.gov.hk/faq/oshq9_4c.htm

http://www.labour.gov.hk/faq/oshq9_4d.htm

http://www.labour.gov.hk/faq/oshq9_4e.htm

http://www.labour.gov.hk/faq/pdf/BreathApparatus.pdf

美国标准

NIOSH 42 CFR Part 84 Respiratory Protective Devices; Final Rules and Notice

ASTM F2101-01 Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials

NFPA 1981 Standard on Open-Circuit Self-Contained Breathing Apparatus for Fire and Emergency Services

欧洲标准

EN136 Respiratory protective devices. Full face masks. Requirements, testing, marking

EN140 Respiratory protective devices. Half masks and quarter masks. Requirements, testing, marking

EN141 Respiratory protective devices. Gas filters and combined filters. Requirements, testing, marking

EN143 Respiratory protective devices. Particle filters. Requirements, testing, marking

EN149 Respiratory protective devices. Filtering half masks to protect against particles. Requirements, testing, marking

EN405 Respiratory protective devices. Valved filtering half masks to protect against gases or gases and particles. Requirements, testing, marking

澳洲 / 新西兰标准

AS/NZS1716 Respiratory Protective Devices

加拿大标准

CSA Z180.1 Compressed Breathing Air Systems

CSA Z94.4 Selection, Use and Care of Respirators

注意: 根据《工厂及工业经营（石棉）规例》及《工厂及工业经营（密闭空间）规例》，有关雇员须使用由其雇主提供的呼吸器具，而该等用具须为劳工处处长认可的型号。有关已被认可的型号，请查阅以下清单。

http://www.labour.gov.hk/faq/oshq9_4a.htm

中国标准

GB 6095 Safety Belts

美国标准

ANSI A10.14 Requirements for safety belts, harnesses, lanyards, and lifelines for construction and demolition use

ANSI Z359.1 American national standards safety requirements for personal fall arrest systems, sub-systems and components

澳洲 / 新西兰标准

AS/NZS 1891.1 Industrial fall arrest systems and devices - Safety belts and harnesses

AS/NZS 1891.3 Industrial fall arrest systems and devices - Fall-arrest devices

欧洲标准

EN 358 Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards

EN 358 Personal protective equipment for work positioning and prevention of falls from a height. Belts for work positioning and restraint and work positioning lanyards

EN 361 Personal protective equipment against falls from a height. Full body harnesses

日本标准

JIS M7624 安全带

美国标准：

ANSI Z41 个人防护 - 安全鞋

澳洲 / 新西兰标准：

AS/NZS 2210.2 职业用安全鞋 - 规格

欧洲标准：

EN ISO 20345 安全鞋
EN ISO 20346 防护鞋
EN ISO 20347 职业鞋

日本标准：

JIS T8101 安全靴

加拿大标准：

CSA Z195-M92 安全鞋

美国标准

ASTM D4679-02 Standard Specification for Rubber General Purpose, Household or Beautician Gloves

ASTM D3577-01ae2 Standard Specification for Rubber Surgical Gloves

ASTM D3578-01ae2 Standard Specification for Rubber Examination Gloves

ASTM D6319-00ae3 Standard Specification for Nitrile Examination Gloves for Medical Application

ASTM D5250-00e4 Standard Specification for Poly(vinyl chloride) Gloves for Medical Application

澳洲

AS 2161 Industrial safety gloves and mittens (excluding electrical and medical gloves)

欧洲标准

EN 374-1 Protective gloves against chemicals and micro-organisms. Terminology and performance requirements

EN 374-2 Protective gloves against chemicals and micro-organisms. Determination of resistance to penetration

EN 374-3 Protective gloves against chemicals and micro-organisms. Determination of resistance to permeation by chemicals

EN 388 Protective gloves against mechanical risks

EN 407 Protective gloves against thermal risks (heat and/or fire)

EN 420 General requirements for gloves